反舰导弹靶场试验精度评定方法

为了对小子样条件下反舰导弹靶场试验精度作出合理的评定,研究了自助法和随机加权法的原理。针对自助法和随机加权法存在的不足,研究了一种改进的方法,仿真结果表明新方法获得了更加稳健、精确的评定。最后,给出一些有益的工程应用建议。     

导弹俯仰通道制导控制一体化设计

根据弹目相对运动关系及导弹系统模型,建立了导弹俯仰通道制导控制一体化模型。利用反馈线性化方法将该模型转化成为可控线性系统,基于自适应反演控制方法设计了控制器对转换后的系统进行控制。仿真结果表明,制导控制一体化设计能够有效减小导弹脱靶量,缩短导弹系统响应时间。     

Stochastic scheduling subject to machine breakdowns: The preemptive‐repeat model with discounted reward and other criteria

We consider the problem of scheduling a set of jobs on a single machine subject to random breakdowns. We focus on the preemptive‐repeat model, which addresses the situation where, if a machine breaks down during the processing of a job, the work done on the job prior to the breakdown is lost and the job will have to be started from the beginning again when the machine resumes its work. We allow that (i) the uptimes and downtimes of the machine follow general probability distributions, (ii) the breakdown process of the machine depends upon the job being processed, (iii) the processing times of the jobs are random variables following arbitrary distributions, and (iv) after a breakdown, the processing time of a job may either remain a same but unknown amount, or be resampled according to its probability distribution. We first derive the optimal policy for a class of problems under the criterion to maximize the expected discounted reward earned from completing all jobs. The result is then applied to further obtain the optimal policies for other due date‐related criteria. We also discuss a method to compute the moments and probability distributions of job completion times by using their Laplace transforms, which can convert a general stochastic scheduling problem to its deterministic equivalent. The weighted squared flowtime problem and the maintenance checkup and repair problem are analyzed as applications. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

基于磁导率法的零部件硬度电磁无损检测技术研究

传统的机械压痕法虽能测量火炮零部件的硬度,但对其表面有损害,且某些零部件工作面并不允许使用打点测量方式．为解决这一问题,基于硬度与材料磁导率之间的对应关系,设计了一种硬度电磁无损检测系统,采用DDS技术实现参数可控的正弦信号源,以满足磁导率测试所需的激励条件．为了提高检测灵敏度,利用交流电桥拾取由硬度变化引起的检测线圈和参考线圈电压差分信号,并进一步在调理电路中采用正交锁相放大技术对这一微弱信号进行放大和噪声抑制．硬度试验结果表明,该系统能以无损的检测方式有效地区分零部件的硬度值,为火炮定型试验中的硬度测量提供了新途径．     

车辆馈能悬挂技术综述

被动悬挂的系统参数不能随路面状况变化而改变,故减振性能有限,且振动能量被减振器以热量的形式耗散,造成了能量的浪费。馈能悬挂能够提高悬挂性能并降低能耗,正受到广泛关注。对车辆悬挂的能量耗散和馈能潜力进行了探讨,回顾了馈能悬挂的研究和发展状况,总结了馈能悬挂的结构方案和优缺点。最后,分析了已有馈能悬挂存在的问题和应用受限的根本原因,并指出能够兼顾振动控制效果与能量回收效率的馈能悬挂将会有良好的发展前景。     

基于变异离散粒子群的协同空战攻击决策算法

为了提高智能协同空战攻击决策算法性能,将变异策略引入到DPSO(Discrete Particle Swarm Optimization)协同空战攻击决策算法中,提出了一种新的基于变异离散粒子群(Mutation Discrete Particle Swarm Optimization,MDPSO)的协同空战攻击决策算法。基于典型空战想定背景,仿真验证了算法的有效性。采用对比实验方法,基于准确性、可靠性和快速性等关键性能指标,分析比较了基于MDPSO协同空战攻击决策算法与多种智能决策算法,验证了基于MDPSO的协同空战攻击决策算法有着较好的综合性能。     

基于禁忌退火算法的巡航导弹航迹规划

针对巡航导弹航迹规划这个复杂的优化问题,一个禁忌退火混合优化算法被提出.首先,该算法是以基本模拟退火算法为基础.其次,为了加快该模拟退火算法的收敛速度,在恶化解的接受判断过程中,增加了一定动态的约束条件.最后,为了使最优解能够跳出局部最优的陷阱,使用了一个动态的禁忌表.仿真结果验证了该禁忌退火混合优化算法能够取得目标函数更优的航迹规划路径,从而有效提高巡航导弹的作战效能.     

Approximation results for min‐max path cover problems in vehicle routing

This article studies a min‐max path cover problem, which is to determine a set of paths for k capacitated vehicles to service all the customers in a given weighted graph so that the largest path cost is minimized. The problem has wide applications in vehicle routing, especially when the minimization of the latest service completion time is a critical performance measure. We have analyzed four typical variants of this problem, where the vehicles have either unlimited or limited capacities, and they start from either a given depot or any depot of a given depot set. We have developed approximation algorithms for these four variants, which achieve approximation ratios of max{3 ‐ 2/k,2}, 5, max{5 ‐ 2/k,4}, and 7, respectively. We have also analyzed the approximation hardness of these variants by showing that, unless P = NP , it is impossible for them to achieve approximation ratios less than 4/3, 3/2, 3/2, and 2, respectively. We have further extended the techniques and results developed for this problem to other min‐max vehicle routing problems.© 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

谈谈《开国将帅》系列肖像油画

王孝柏同志创作的系列肖像油画--<开国将帅>,是一项艰巨、浩大的油画创作工程.它是以为共和国诞生立下显赫战功的十大元帅和十大将为创作对象,每位将帅的形象按构思要求,均须设计为胸像式的"标准像"构图,每位将帅的服装、佩饰基本一致,形式统一.     

新型舰船雷达标校系统的同步研究

时间和频率同步是雷达标校系统的关键技术之一,同步的实现是系统采用两地雷达目标模拟技术所必须的;研究了一种基于GPS卫星的时间和频率同步方案,即接收GPS转发的标准时间和频率信号,采用同步模块实现标校系统舰上和岸上两地的时间和频率同步,该方案优于传统同步装置的长时间校正频率误差,提高了标校系统的时间和频率同步精度,从而减小了标校系统对雷达进行标定校准的误差。